Small numeric virtual keypad
Posted: Thu May 16, 2024 6:10 pm
I did make a small numeric virtual keypad for a touchscreen.
If you have to fill in some numbers there is no need for a extra keyboard. You need first to startup the Centroid program.
You make first the virtual panel smaller to make some place for it.
Startup the program NumPad. And click on Move-button
And click Free-Move-button.
Place with the mouse in the right-bottom corner.
Click on the Fixed-button, the screen will jump up a little.
Adjust with the other buttons the proper position.
Click now on the Lock-button
And all is ready to use.
On the close of the Centroid program it will also automatically close.
I did put this on GitHub (source in VB.Net and compiled version) for free.
https://github.com/BigBoss57/Virtual-Numeric-Keypad-CNC
Disclaimer: You use this on your own risk.
If you have to fill in some numbers there is no need for a extra keyboard. You need first to startup the Centroid program.
You make first the virtual panel smaller to make some place for it.
Startup the program NumPad. And click on Move-button
And click Free-Move-button.
Place with the mouse in the right-bottom corner.
Click on the Fixed-button, the screen will jump up a little.
Adjust with the other buttons the proper position.
Click now on the Lock-button
And all is ready to use.
On the close of the Centroid program it will also automatically close.
I did put this on GitHub (source in VB.Net and compiled version) for free.
https://github.com/BigBoss57/Virtual-Numeric-Keypad-CNC
Disclaimer: You use this on your own risk.