Page 7 of 7
Re: Who is up and running on CNC12 4.14?
Posted: Thu Jun 06, 2019 4:07 pm
by Chaz
Can anyone tell me why I am getting an error with the code which Keith has supplied?
Thanks
Re: Who is up and running on CNC12 4.14?
Posted: Thu Jun 06, 2019 7:08 pm
by cnckeith
Chaz wrote: ↑Thu Jun 06, 2019 4:07 pm
Can anyone tell me why I am getting an error with the code which Keith has supplied?
Thanks
WhatsApp Image 2019-06-06 at 21.06.37.jpeg
Please start a new thread.
please follow the tech support request guidelines and add fair minimum provide a fresh report.zip and will be glad to help.
Re: Who is up and running on CNC12 4.14?
Posted: Fri Jun 07, 2019 1:24 am
by Chaz
Will do. Dont have access to the machine to get a report. I asked here as it was directly related to the supplied code and hoped that someone could easily spot the error.
Re: Who is up and running on CNC12 4.14?
Posted: Fri Jun 07, 2019 3:01 am
by Chaz
Ok, I suspect I know the answer. G91 doesnt work on lathes. Your example is a Mill.
I spotted this here -
viewtopic.php?f=60&t=2887&p=21045&hilit=G91#p21045
So Ill find the correct format for a lathe. See, didnt need a report for that
Of course a report would have identified it being a Lathe too.
Thanks as always.