Page 23 of 25
Re: Fusion 360 Mill Post Processor for CNC12 with additional Features (New Community Version 1.0)
Posted: Fri Apr 25, 2025 2:25 pm
by occustoms
get this when i try and do 3axis sim
Cannot simulate with machine:
Machine configuration is overridden by the post script.
at onOpen (Centroid_Mill_Community_v1.0.cps:468)
Re: Fusion 360 Mill Post Processor for CNC12 with additional Features (New Community Version 1.0)
Posted: Fri Apr 25, 2025 3:06 pm
by suntravel
Use the V2 version in my last post.
It will run your file in simulation without an error.
Uwe
Re: Fusion 360 Mill Post Processor for CNC12 with additional Features (New Community Version 1.0)
Posted: Fri Apr 25, 2025 5:48 pm
by occustoms
Got it thank you. Seems to be working great now.
Re: Fusion 360 Mill Post Processor for CNC12 with additional Features (New Community Version 1.0)
Posted: Fri Apr 25, 2025 5:51 pm
by occustoms
Actually it works in simulation, but cant prost process gcode.
Re: Fusion 360 Mill Post Processor for CNC12 with additional Features (New Community Version 1.0)
Posted: Fri Apr 25, 2025 5:53 pm
by occustoms
has no settings for 4th axis or anything like the other post processors on here
Re: Fusion 360 Mill Post Processor for CNC12 with additional Features (New Community Version 1.0)
Posted: Sat Apr 26, 2025 1:03 am
by suntravel
occustoms wrote: ↑Fri Apr 25, 2025 5:53 pm
has no settings for 4th axis or anything like the other post processors on here
Because this is in the machine model.
New fusion PP are all with the kinematics in the machine.
I have no problem generating the g code and load it in CNC12
Uwe
Re: Fusion 360 Mill Post Processor for CNC12 with additional Features (New Community Version 1.0)
Posted: Mon Apr 28, 2025 1:15 pm
by occustoms
i do have the kinematics all setup in machine model . but when i try and post using the post processor u gave to use.
i dont have any 4th axis enable or anything like that. its just a generic 3 axis post processor
Are you using the same post processor to generate g-code as you are simulating it? (centroidfourum v2)
Re: Fusion 360 Mill Post Processor for CNC12 with additional Features (New Community Version 1.0)
Posted: Mon Apr 28, 2025 1:20 pm
by occustoms
occustoms wrote: ↑Mon Apr 28, 2025 1:15 pm
i do have the kinematics all setup in machine model . but when i try and post using the post processor u gave to use.
i dont have any 4th axis enable or anything like that. its just a generic 3 axis post processor
Are you using the same post processor to generate g-code as you are simulating it? (centroidfourum v2)
Re: Fusion 360 Mill Post Processor for CNC12 with additional Features (New Community Version 1.0)
Posted: Mon Apr 28, 2025 1:25 pm
by suntravel
Yes the same, more than 4 axis are not in the PP but in the machine model.
There must not be an option in the PP dialog to activate 4th or 5th axis.
Uwe
Re: Fusion 360 Mill Post Processor for CNC12 with additional Features (New Community Version 1.0)
Posted: Mon Apr 28, 2025 1:26 pm
by occustoms
ok it post with using safe retracts set to G28 and not "clearance height "