Centroid Community CNC Support Forum

These are the limit switches I’m using.
Search ebay for this: TEMCo Micro Limit Switch Long Roller Lever Arm SPDT Snap Action home
Link to current auction: https://www.ebay.com/itm/10-pc-TEMCo-Mi ... LnzuClv7Gg
They have long and short roller arm versions available in various lot sizes. They seem decent and are dirt cheap. I also bought some Temco toggle switches (I think they're about 20 amp AC capable) that I wanted to use to be able to shut off AC power to various components but I'm not that happy with those. They are stiff and don't have a nice feel to them, also just packed in a padded bag so the on/off cover plates are all beat up and bent. Also quite cheap, but not that nice.

ScotY wrote: ↑Sat Dec 09, 2017 2:14 pm That’s a cool panel, Gary. What kind of connectors are they?

Scot...
Phoenix is the brand, I buy them from DigiKey. They are a bit pricey $10-18 a pair, depending on # of pins. I can get a part number from the BOM if you need it.

Hi Gary,
If you could tell us what they are called, I could search for it. What kind of termination is on the inside?

ScotY wrote: ↑Sat Dec 09, 2017 6:44 pm Hi Gary,
If you could tell us what they are called, I could search for it. What kind of termination is on the inside?

Lookup Phoenix bulkhead connectors
Might start here: https://www.mouser.com/Connectors/Termi ... gh&FS=True

Thanks, but the problem with looking for stuff on Mouser, Digikey, etc. is you can’t really tell how it works or how you attach the wires on the inside.

Gary Campbell wrote: ↑Sat Dec 09, 2017 10:35 am Marty...
Not sure where Scot gets his, but I buy 50+ of these a year: http://www.factorymation.com/wallmount_ ... losures_SB

DSC00301.JPG

DSC00305.JPG

Possibly soon to come:

REZ for Acorn Logo2.png

Thanks for the additional resource!
Marty

Gary Campbell wrote: ↑Sat Dec 09, 2017 4:39 pm

ScotY wrote: ↑Sat Dec 09, 2017 2:14 pm That’s a cool panel, Gary. What kind of connectors are they?

Scot...
Phoenix is the brand, I buy them from DigiKey. They are a bit pricey $10-18 a pair, depending on # of pins. I can get a part number from the BOM if you need it.

Gary, I think creating a new post with your connectors and both plug and mating connector would be a good resource for the group.

Thanks for sharing your sources.
Marty

ScotY wrote: ↑Sat Dec 09, 2017 7:27 pm Thanks, but the problem with looking for stuff on Mouser, Digikey, etc. is you can’t really tell how it works or how you attach the wires on the inside.

Sounds like you will do like a lot of us when get get started. Buy a bunch of stuff until you find something you like and then create a junk drawer with ALL the stuff you couldn't use.

ScotY wrote: ↑Sat Dec 09, 2017 7:27 pm Thanks, but the problem with looking for stuff on Mouser, Digikey, etc. is you can’t really tell how it works or how you attach the wires on the inside.

Scot...
Actually in this case the solder terminals in the back are well shown.

Marty...
Thread created

Thanks, Gary, that’s excellent! I looked quickly at the link frijoli posted and it didn’t show a pic like that. Yeah, Marty, I’ve spent countless dollars on junk I can’t use. Trying to avoid that, if possible.