Re: Z Axis only traveling in -neg direction...(Resolved)
Posted: Thu Jun 24, 2021 5:32 am
Download Mill Operators manual here https://www.centroidcnc.com/centroid_di ... -v4.14.pdf
If you need a hardcopy, the Print button is your friend but I prefer the search function in the PDF itself
Note this is written for the Oak and All in One boards but the vast majority is applicable for Acorn too. Using the Wizard is straight forward and is well discussed on this Forum but feel free to ask specific guidance
Hope this helps
If you need a hardcopy, the Print button is your friend but I prefer the search function in the PDF itself
Note this is written for the Oak and All in One boards but the vast majority is applicable for Acorn too. Using the Wizard is straight forward and is well discussed on this Forum but feel free to ask specific guidance
Hope this helps