ATC macro help

[slodat]

What spindle is that??

[bmilam]

Its a non branded Chinese spindle

[slodat]

Link?

[martyscncgarage]

When you guys perfect your linear ATC Macros would you please post them here with a description:
viewtopic.php?f=63&t=1340

[bmilam]

Can't post there any more Marty. The thread is locked

[bmilam]

Slodat, I will pm you with information.

[bmilam]

Got the delay into the clamping of the tool and got the tool to step out in the Y to clear rack before lowering. Finally got to test it with tools in place. Seems to run just like it should for now. I really appreciate everyone's help. I could have never gotten this done without the forum.
Here is a video of it running a short program changing all 7 tools.

[David Buchhauser]

Nice work Bobby!!
I hope to get mine working soon as well. I'm going to try sliding my tool holders into the forks (claws) using a similar macro.
I'm using the same atc water cooled spindle as Bobby, in fact - Bobby was the one that told me about the Ebay seller. I am very impressed with the fit, finish, and quality of the spindle, VFD, NBT30 tool holders, collets, and tool forks this seller provided. For anyone interested, here is his listing.

https://www.ebay.com/itm/Combo-ATC-Tool ... 3963885227

And here are some photos of my project. This is the Avid Pro4824 kit using the Acorn controller and ATC water cooled spindle. I am in the process of building a full enclosure as my intended use for this machine is machining aluminum (no wood).
David

[bmilam]

Thanks David. Tomorrow I plan on putting the machine thru it's paces actually cutting some things that have been stacking up. Good luck with yours. I know you are going to love it.

[martyscncgarage]

Guys, I created a Sticky topic for users to share their cool Macros. You are doing such cool things with them, putting effort into them, collaborating on them, they deserve a thread to share with others to help and inspire them.
So, if you care to share:
viewtopic.php?f=60&t=3938

Thanks for helping make Acorn and CNC12 a continued success!
Marty