Page 3 of 4
Re: CNC12 Router Restructure Beta Software thread. RC2 Now available, July 23rd
Posted: Thu Jul 25, 2024 8:33 pm
by tuffduck
I noticed the incremental movement for each axis has been either moved or removed. What is the recommended work around?
Thanks
Re: CNC12 Router Restructure Beta Software thread. RC2 Now available, July 23rd
Posted: Thu Jul 25, 2024 11:13 pm
by ShawnM
suntravel wrote: ↑Thu Jul 25, 2024 11:39 am
Sure, no deal to make it work, but even Intercon on a router is posting M7 if Mist is selected in the tool lib.
This one shortcut misusing M7 for Dust has a long rattail now.
If it is changed correctly to maybe M107, lots of users will curse Centroid because they have to change something
IMHO the best bet is to stay with ISO 6983 for all basic functions.
Uwe
I'll admit I've never used Intercon and have no need to or plans to so maybe I'm not the best person to comment then.
Re: CNC12 Router Restructure Beta Software thread. RC2 Now available, July 23rd
Posted: Fri Jul 26, 2024 3:12 pm
by tuffduck
Trying to find this screen.
Thanks
Re: CNC12 Router Restructure Beta Software thread. RC2 Now available, July 23rd
Posted: Fri Jul 26, 2024 6:57 pm
by tblough
Chapter 6.6 in the manual
Re: CNC12 Router Restructure Beta Software thread. RC2 Now available, July 23rd
Posted: Fri Jul 26, 2024 9:43 pm
by tuffduck
Thanks
Re: CNC12 Router Restructure Beta Software thread. RC2 Now available, July 23rd
Posted: Fri Jul 26, 2024 10:38 pm
by cncsnw
F1/Setup -> F4/Feed -> F2/Inc
Re: CNC12 Router Restructure Beta Software thread. RC2 Now available, July 23rd
Posted: Mon Jul 29, 2024 8:03 am
by cnckeith
tuffduck wrote: ↑Thu Jul 25, 2024 8:33 pm
I noticed the incremental movement for each axis has been either moved or removed. What is the recommended work around?
Thanks
- most use MDI to do this.
- the menu's have been moved
F7 Utility, ---> F4 Power Feed
- we are working on a CNC12 Router Operator manual.
Re: CNC12 Router Restructure Beta Software thread. RC3 Now available, July 29rd
Posted: Mon Jul 29, 2024 6:02 pm
by Boatwrights Workshop
Will there be a revised manual for the new features, especially for the "Configuration Wizard? I would like to a brief explanation of how to configure these screenshots I have posted? I have tried the "Touch Plate" configuration but I get a notice saying it's not setup correctly even though my tool touch off is functionable in Input #7.
Re: CNC12 Router Restructure Beta Software thread. RC3 Now available, July 29rd
Posted: Mon Jul 29, 2024 6:30 pm
by cnckeith
Boatwrights Workshop wrote: ↑Mon Jul 29, 2024 6:02 pm
Will there be a revised manual for the new features, especially for the "Configuration Wizard? I would like to a brief explanation of how to configure these screenshots I have posted? I have tried the "Touch Plate" configuration but I get a notice saying it's not setup correctly even though my tool touch off is functionable in Input #7.
yes we are working on a CNC12 Router Operator manual.
for now just post your question on the forum and we'll do our best to answer it.
and you'll have to post a fresh report.zip so we can see your setup. thanks!
Re: CNC12 Router Restructure Beta Software thread. RC3 Now available, July 29rd
Posted: Mon Jul 29, 2024 6:33 pm
by cnckeith
Boatwrights Workshop wrote: ↑Mon Jul 29, 2024 6:02 pm
Will there be a revised manual for the new features, especially for the "Configuration Wizard? I would like to a brief explanation of how to configure these screenshots I have posted? I have tried the "Touch Plate" configuration but I get a notice saying it's not setup correctly even though my tool touch off is functionable in Input #7.
are you confusing a Tool Touch off (aka TT used for setting tool lengths) with a Surface plate typically used to set part zero?