Centroid CNC12 v5.04 has been released. UPDATE v5.06 has been released.

Moderator: cnckeith

Locked
cnckeith
Site Admin
Posts: 8879
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: Centroid CNC12 v5.04 has been released. Click here to download.

Post by cnckeith »

v5.06 has been released. more info here.

https://www.centroidcnc.com/centroid_di ... loads.html
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html

Top
713cnc
Posts: 20
Joined: Tue Jul 16, 2024 3:41 am
Acorn CNC Controller: No
Plasma CNC Controller: No
AcornSix CNC Controller: Yes
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Contact:
Contact 713cnc

Re: Centroid CNC12 v5.0 has been released. Click here to download.

Post by 713cnc »

cnckeith wrote: ↑Tue May 09, 2023 7:24 pm try it out and let me know if it works for you.

I have a rotary axis as well as a A/C trunion. Is there a way to cycle between 3rd/4th/ and 5th axis?
P130=11 and P131=31 ?
Or do I just need to always leave my 4th axis on and toggle 5th axis

Top
cnckeith
Site Admin
Posts: 8879
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: Centroid CNC12 v5.0 has been released. Click here to download.

Post by cnckeith »

713cnc wrote: ↑Mon Mar 31, 2025 2:33 pm
cnckeith wrote: ↑Tue May 09, 2023 7:24 pm try it out and let me know if it works for you.

I have a rotary axis as well as a A/C trunion. Is there a way to cycle between 3rd/4th/ and 5th axis?
P130=11 and P131=31 ?
Or do I just need to always leave my 4th axis on and toggle 5th axis
hi, this is an old thread. please start a new thread! :D
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html

Top
Locked

Return to “Public Beta CNC Software Testing, Discussion and Feedback”