Centroid Community CNC Support Forum

Posted: **Wed Aug 21, 2024 1:50 pm**

audioandy wrote: ↑Tue Aug 20, 2024 3:34 pm Hi Joey

Many thanks for the reply.

I'm not running Acorn Plasma I'm running the machine with Acorn Mill. The Acorn was purchased some years ago before the Plasma software was released.
It's just the feedrate syntax error I cannot get my head around. Does the Acorn Plasma handle Sheetcam differently?
I will get a report posted as soon as I can ,but it could be a week before I'm with the machine again.
Kind Regards
Andy

Ahh I see.

I think Sheetcam has a default Centroid Post that will be more suitable. This will actually use the M3 and Feed rates

The Centroid Plasma Post is different and made for Acorn Plasma's Profile manager and Plasma M-codes.

Posted: **Thu Feb 06, 2025 11:45 am**

Joey,

I have finally decided that I need to change from using Fusion CAM for plasma and make the switch to Sheetcam. I tried to watch the video at the top of this thread and noticed that is no longer working. Is it me or did the video go away?

Posted: **Thu Feb 06, 2025 12:02 pm**

It was me

Posted: **Thu Feb 06, 2025 4:03 pm**

Posted: **Tue Mar 11, 2025 2:27 am**

is Fantastic!

Posted: **Wed May 21, 2025 2:05 am**

Thanks for your video,it's helpful.

Centroid Community CNC Support Forum

Post Processor Sheet Cam/Fusion 360

Re: Post Processor Sheet Cam/Fusion 360

Re: Post Processor Sheet Cam/Fusion 360

Re: Post Processor Sheet Cam/Fusion 360

Re: Post Processor Sheet Cam/Fusion 360

Re: Post Processor Sheet Cam/Fusion 360

Re: Post Processor Sheet Cam/Fusion 360