Im going to get rid of the shot pin orient, look like everybody have hard time to make work with centroid.
i just going to get one of those chinese spindle and match drive from Atomation Technologies!
it seem Centroid is more for use with modern Servo VFD.... I just ordered one kit!
"shot pin tool change orientation"
Moderator: cnckeith
-
- Posts: 7
- Joined: Mon Jul 19, 2021 6:24 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: "shot pin tool change orientation"
You will need a good spindle motor, you'll need a good spindle encoder, good VFD with optional Encoder board and has Spindle orient input capabilities.Apolo1969# wrote: ↑Thu Jul 29, 2021 3:40 pm Im going to get rid of the shot pin orient, look like everybody have hard time to make work with centroid.
i just going to get one of those chinese spindle and match drive from Atomation Technologies!
it seem Centroid is more for use with modern Servo VFD.... I just ordered one kit!
And understand how to set it up.
I don't think the shot pin orient was a deal breaker, I would have probably tried to work with that first.
Good luck with your project in any case!
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ