Yes it was the bottom part of the G28 command missing all working ok now .
if (words.length > 0) {
switch (method) {
case "G28":
gMotionModal.reset();
gAbsIncModal.reset();
writeBlock(gFormat.format(28), gAbsIncModal.format(91), words);
writeBlock(gAbsIncModal.format(90));
break;
case "G53":
gMotionModal.reset();
writeBlock(gAbsIncModal.format(90), gFormat.format(53), gMotionModal.format(0), words);
break;
default:
error(localize("Unsupported safe position method."));
return;
}
Cheers for help.
Gix.
Error 907 Z Axis travel exceeded (RESOLVED)
Moderator: cnckeith
-
Gixer
- Posts: 45
- Joined: Tue Jun 30, 2020 3:18 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 0324202376
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Error 907 Z Axis travel exceeded
(Note: Liking will "up vote" a post in the search results helping others find good information faster)