Software will not load <answered>

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Kutton
Posts: 86
Joined: Tue Jan 01, 2019 2:15 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: Software will not load

Post by Kutton »

cncman172 wrote: ↑Tue Feb 05, 2019 10:28 am Kutton,
Watch this video from Marty and see if you have a static IP address configured in Windows for Acorn board.
Russ



Do this test!
viewtopic.php?f=61&t=1451
You guys nailed it thank so much.

Top
martyscncgarage
Community Expert
Posts: 9948
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Software will not load

Post by martyscncgarage »

Kutton wrote: ↑Tue Feb 05, 2019 9:01 pm
cncman172 wrote: ↑Tue Feb 05, 2019 10:28 am Kutton,
Watch this video from Marty and see if you have a static IP address configured in Windows for Acorn board.
Russ



Do this test!
viewtopic.php?f=61&t=1451
You guys nailed it thank so much.
Make sure you are doing reports as you make progress....
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ

Top
Post Reply

Return to “Centroid Acorn CNC Controller”