Re: Hickory - Slave axis moves independently (BUG?)
Posted: Fri Aug 29, 2025 3:29 pm
Parameter 218 allows you to define which axes can be controlled by the WMPG.
You currently have it set to 15 allowing axes 1, 2, 3, and 4 to be commanded.
Changing it to 7 will allow it to control only axes 1, 2, and 3.
You currently have it set to 15 allowing axes 1, 2, 3, and 4 to be commanded.
Changing it to 7 will allow it to control only axes 1, 2, and 3.