Needing help regarding a Bridgeport Boss with a DP4 probe. RESOLVED

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
KEITH_TSE
Posts: 9
Joined: Thu Sep 05, 2024 11:29 am
Acorn CNC Controller: No
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: OAK: 104625, CPU7: 20295
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: Yes

Re: Needing help regarding a Bridgeport Boss with a DP4 probe.

Post by KEITH_TSE »

The software update did not do the trick.

Any other suggestions?

Top
KEITH_TSE
Posts: 9
Joined: Thu Sep 05, 2024 11:29 am
Acorn CNC Controller: No
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: OAK: 104625, CPU7: 20295
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: Yes

Re: Needing help regarding a Bridgeport Boss with a DP4 probe.

Post by KEITH_TSE »

Here is the report.zip file and not the report.txt as previously posted.
Attachments
report.zip
(51.04 KiB) Downloaded 1 time

Top
KEITH_TSE
Posts: 9
Joined: Thu Sep 05, 2024 11:29 am
Acorn CNC Controller: No
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: OAK: 104625, CPU7: 20295
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: Yes

Re: Needing help regarding a Bridgeport Boss with a DP4 probe. RESOLVED

Post by KEITH_TSE »

Ended up contacting directly and having the PLC program changed to remove the probe inputs and probe fault logic. IN14 and IN15 still show green and red "incorrectly" as previously stated. Thanks for everyone's input and efforts.

Top
Post Reply

Return to “Centroid Oak, Allin1DC, MPU11 and Legacy products”