Page 2 of 15
Re: Centroid CNC12 v5.19 rev3 BETA CNC software is now available for public testing
Posted: Mon Aug 12, 2024 9:12 am
by Allin1Chris
Sword wrote: ↑Sat Aug 10, 2024 1:07 am
I see that the "Axis Drive Type" configurations show none of the usual I/O information and thus does not load any of the I/O info that was previously saved with a drive type. Is this intended or a temporary bug?
In fact, a quick comparison of an old drive type .xml and a new one shows a lot of info is missing or omitted. Old file is 353 lines whereas the new is only 59 lines.
The I/O Information and Drive Information were separated into 2 different presets. For this particular revision, the I/O preset screen was hidden, but should appear in the next revision.
Separating them is useful for when you use different drives but use one standard i/o layout.
Re: Centroid CNC12 v5.19 rev3 BETA CNC software is now available for public testing
Posted: Mon Aug 12, 2024 1:16 pm
by Sword
ASPeters wrote: ↑Mon Aug 12, 2024 8:37 am
This is a new file that has to be added called "user_language.msg" which can then be moved from version to version without having to edit language.msg everytime we put a new build out.
Thanks for this! That took care of the last three that I couldn't change on the main menu with the language.msg file. Nice that it's portable too!
Call me anal, but that looks better.
Re: Centroid CNC12 v5.19 rev3 BETA CNC software is now available for public testing
Posted: Mon Aug 12, 2024 1:21 pm
by Sword
Allin1Chris wrote: ↑Mon Aug 12, 2024 9:12 am
The I/O Information and Drive Information were separated into 2 different presets. For this particular revision, the I/O preset screen was hidden, but should appear in the next revision.
Separating them is useful for when you use different drives but use one standard i/o layout.
Gottcha, thanks for the explanation.
Re: Centroid CNC12 v5.19 rev3 BETA CNC software is now available for public testing
Posted: Mon Aug 12, 2024 6:57 pm
by ShawnM
Allin1Chris wrote: ↑Mon Aug 12, 2024 9:12 am
The I/O Information and Drive Information were separated into 2 different presets. For this particular revision, the I/O preset screen was hidden, but should appear in the next revision.
Separating them is useful for when you use different drives but use one standard i/o layout.
What's the file name for the I/O information? Is it another XML file? I'd like to add this file to the script I use to copy out all important machine parameters. The I/O info in a single file saves a lot of time on new installs.
Re: Centroid CNC12 v5.19 rev3 BETA CNC software is now available for public testing
Posted: Tue Aug 13, 2024 3:10 am
by suntravel
Sword wrote: ↑Mon Aug 12, 2024 1:16 pm
Call me anal, but that looks better.
Completely different meaning in German
But yes, it looks better for me also.
Uwe
Re: Centroid CNC12 v5.19 rev3 BETA CNC software is now available for public testing
Posted: Tue Aug 13, 2024 6:42 am
by RC-Lights
hi all,
i udated to the new 5.19rev3 Beta. Installation was okay, but after setting the wizzard i got an error-message:
most of the settings i did are not working. i opened a wizzard and tried again, without succes.
Machine is not useable right now. any ideas, if maybe i did something wrong ?
Report is attached.
best regards,
Michael
Re: Centroid CNC12 v5.19 rev3 BETA CNC software is now available for public testing
Posted: Tue Aug 13, 2024 8:25 am
by friolator
suntravel wrote: ↑Tue Aug 13, 2024 3:10 am
Completely different meaning in German
Same meaning, but in (at least American) English, it's shorthand for "anal retentive" -- as in, extremely fussy.
Re: Centroid CNC12 v5.19 rev3 BETA CNC software is now available for public testing
Posted: Tue Aug 13, 2024 9:48 am
by Allin1Chris
RC-Lights wrote: ↑Tue Aug 13, 2024 6:42 am
hi all,
i udated to the new 5.19rev3 Beta. Installation was okay, but after setting the wizzard i got an error-message:
PLC Error.png
most of the settings i did are not working. i opened a wizzard and tried again, without succes.
Machine is not useable right now. any ideas, if maybe i did something wrong ?
Report is attached.
best regards,
Michael
Thanks for pointing this out, attached is a quick fix for you. Extract the contents of the .zip into your C:\cnct directory and overwrite. This issue will be resolved in future revisions.
Re: Centroid CNC12 v5.19 rev3 BETA CNC software is now available for public testing
Posted: Tue Aug 13, 2024 10:47 am
by RC-Lights
Allin1Chris wrote: ↑Tue Aug 13, 2024 9:48 am
RC-Lights wrote: ↑Tue Aug 13, 2024 6:42 am
hi all,
i udated to the new 5.19rev3 Beta. Installation was okay, but after setting the wizzard i got an error-message:
PLC Error.png
most of the settings i did are not working. i opened a wizzard and tried again, without succes.
Machine is not useable right now. any ideas, if maybe i did something wrong ?
Report is attached.
best regards,
Michael
Thanks for pointing this out, attached is a quick fix for you. Extract the contents of the .zip into your C:\cnct directory and overwrite. This issue will be resolved in future revisions.
Thanks for the Quick Support, is working now!
Michael
Re: Centroid CNC12 v5.19 rev3 BETA CNC software is now available for public testing
Posted: Tue Aug 13, 2024 10:55 am
by Sword
suntravel wrote: ↑Tue Aug 13, 2024 3:10 am
Completely different meaning in German
But yes, it looks better for me also.
Uwe
Ah yes, the pitfalls of an international crowd.
