Fourth axis and power problem (resolved with photos)
Moderator: cnckeith
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Fourth axis and power problem (resolved with photos)
Nice router too by the way. Looking forward to seeing a video of it running under Acorn and CNC12 control.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 20
- Joined: Sun Apr 03, 2016 2:39 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: A900460
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Vermont
Re: Fourth axis and power problem (resolved with photos)
Here is a picture of the control with the time delay relay installed in case anyone’s interested.
https://photos.app.goo.gl/PIaytV4hpaaTIX7f1
Dan
https://photos.app.goo.gl/PIaytV4hpaaTIX7f1
Dan
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Fourth axis and power problem (resolved with photos)
Right on Dan. Machine is now functional?
Take a video of the machine doing its thing and the control running when you get a chance.
Marty
Take a video of the machine doing its thing and the control running when you get a chance.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 7502
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Fourth axis and power problem (resolved with photos)
dan thanks for the great photos..nice clean install!
im just reposting here again within the forum.
im just reposting here again within the forum.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html