Thc primeweld60 cable

All things related to the Centroid CNC Plasma systems, Hardware and Software.

Moderators: cnckeith, Joey

Post Reply
Welding305
Posts: 10
Joined: Sat Feb 22, 2025 9:40 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: Yes
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Thc primeweld60 cable

Post by Welding305 »

Hi,
Is there any info about the cable itself?
Can’t find it.

It has 2 cables coming out one end
What is what?

Thx……

Top
Joey
Plasma/Laser Lead
Posts: 637
Joined: Tue Aug 17, 2021 10:51 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Thc primeweld60 cable

Post by Joey »

Here's a hook up schematic that has Centroid's Primeweld Interface Cable.
https://www.centroidcnc.com/dealersuppo ... 194.r1.pdf
Screenshot_20250415-003953.png
Check out the Schematics Page here https://www.centroidcnc.com/centroid_di ... =Primeweld

Top
centroid467
Posts: 755
Joined: Thu Apr 14, 2022 2:46 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: No

Re: Thc primeweld60 cable

Post by centroid467 »

Welding305 wrote: ↑Mon Apr 14, 2025 11:51 pm Hi,
Is there any info about the cable itself?
Can’t find it.

It has 2 cables coming out one end
What is what?

Thx……
Yes, it forks off into two smaller groups of conductors. One goes to the THC and carries the divided torch voltage. The other goes to the relay board and carries the signals for commanding the torch to turn on.

Top
Post Reply

Return to “CNC Plasma”