v5.30 has been released 3-7-25

Moderator: cnckeith

Post Reply
cnckeith
Posts: 8683
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

v5.30 has been released 3-7-25

Post by cnckeith »

v5.30 has been released 3-7-25

https://www.centroidcnc.com/centroid_di ... loads.html

a.) Fixed a Wizard bug introduced into the Wizard Axis menu Overall Turns ratio max rate calculation warning for Rotary axis

b.) Fixed G540 “Legacy mode” support for Acorn. G540 Legacy mode = running Acorn inputs and outputs through the G540.

c.) Fixed Smoothing Function key typo for the F key label introduced in v5.28 when updating the text in CNC12 for clarity.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html

Top
Post Reply

Return to “Public Beta CNC Software Testing, Discussion and Feedback”