Strange drive fault

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
TCandee
Posts: 125
Joined: Sun Jun 17, 2018 2:42 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: C8FD19F6D5CF-0403180778
DC3IOB: No
CNC11: No
CPU10 or CPU7: Yes

Re: Strange drive fault

Post by TCandee »

If I do need to switch to separate drive ok inputs, is it possible to put 3 axis on the drive ok input and 1 on the 4thaxisdriveok input. I only have one input left and no room for ether1616.

Top
cnckeith
Posts: 8627
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: Strange drive fault

Post by cnckeith »

yeah i think that logic will work.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html

Top
TCandee
Posts: 125
Joined: Sun Jun 17, 2018 2:42 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: C8FD19F6D5CF-0403180778
DC3IOB: No
CNC11: No
CPU10 or CPU7: Yes

Re: Strange drive fault

Post by TCandee »

Thank you for the information. I’ll give it a shot.

Top
Post Reply

Return to “Centroid Acorn CNC Controller”