CNC on the cheap. Kai's Techno Router Acorn CNC controller build part list

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
CentroidFrog
Tech Support
Posts: 104
Joined: Wed Jan 29, 2025 9:39 am
Acorn CNC Controller: No
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: CNC on the cheap. Kai's Techno Router Acorn CNC controller build part list

Post by CentroidFrog »

Cable management on that build is top notch. The way he mounted the relay board helps keep everything neat and tidy.
Want to post your own question?
Check this out first: http://centroidcncforum.com/viewtopic.php?f=60&t=1043
Acorn CNC tech tips: viewforum.php?f=63

Top
cnckeith
Site Admin
Posts: 8879
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: CNC on the cheap. Kai's Techno Router Acorn CNC controller build part list

Post by cnckeith »

fyi..the circuit breaker link is dead, to be expected after a few years. i buy my breakers at automation direct.
https://www.automationdirect.com/adc/se ... archqty=10

make sure to get the "d curve" (aka slow blow) units.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html

Top
Post Reply

Return to “Centroid Acorn CNC Controller”