upgrade requirements from CNC11 v3.16 to CNC12

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
CRM
Posts: 115
Joined: Mon Jan 03, 2011 11:54 pm
Acorn CNC Controller: No
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: Yes
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: A900171
DC3IOB: No
CNC12: No
CNC11: Yes
CPU10 or CPU7: No

upgrade requirements from CNC11 v3.16 to CNC12

Post by CRM »

It's been a while since I've messed around with my Centroid mill conversion (no time during summer months); but I am nearing the point where I am going to retire from my day job, and with that I will lose access to the Haas VF-3 I run to do my "government" work. My Trak DPM conversion runs, but there are several things that need tweaking...including getting my 4th axis fully functional.
What advantages would I have by updating to the current CNC12 release of the software from my existing CNC11 V3.16? Is it just for wireless MPG and Virtual Control Panel support? (I have a wired MPG that I am satisfied with, not sure what the VCP gains me over the Operator's Control Pendant that I already have) If I decide to do so, is there a TSB to explain the process? I thought I read somewhere some time back that there's an intermediate step I have to perform to get from V3.16 to CNC12 V5.xx. And, if I understand correctly, there will be a cost to doing so ($299.00)
If there's no compelling reason to upgrade to CNC12, should I update CNC11 to the latest (V4.16?) version that doesn't cost anything?
Short term goal:
1) 4th axis rotary (already have the additional axis drive installed; still fighting some setup parameter issues--axis moves but unable to successfully home the Hardinge 5C indexer)
Long term goals:
2) add glass scale to quill and implement Z/W axis summing
3) add spindle position encoder to implement rigid tapping
4) add probing functionality
Attachments
report_1127191415_2024-12-09_18-06-58.zip
(4.45 MiB) Downloaded 7 times
Dean Jahnz
Cannon River Machine


cncsnw
Community Expert
Posts: 4588
Joined: Wed Mar 24, 2010 5:48 pm

Re: upgrade requirements from CNC11 v3.16 to CNC12

Post by cncsnw »

You should be able to do most of what you want using CNC11 v3.16, or optionally CNC12 v4.14.


polaraligned
Posts: 232
Joined: Mon Feb 07, 2011 8:03 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 1030090103
DC3IOB: Yes
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No
Location: Montvale, NJ

Re: upgrade requirements from CNC11 v3.16 to CNC12

Post by polaraligned »

I upgraded to CNC12 pro about 4 years ago to get the probing. The CNC11 probing add on was $800 whereas the CNC12 pro upgrade that includes probing was $299. Made no sense to pay $500 more to add probing to CNC11. Best to call them to see what current pricing is. CNC12 will run just fine on Win7, and was rock solid for me. Centroid does not support it on Win7 and recommends Win10 which sucks, but it works.


cnckeith
Site Admin
Posts: 8943
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: upgrade requirements from CNC11 v3.16 to CNC12

Post by cnckeith »

win 10 or 11

fyi. CNC12 v5.+ upgrade purchase page is here.
https://shopcentroidcnc.com/shop/cnc-so ... 1dc-mpu11/
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html


Post Reply