Feed Rate
Moderator: cnckeith
-
- Posts: 3
- Joined: Tue Apr 06, 2021 9:49 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 0309214470
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Feed Rate
I built a diy cnc router and have everything working properly. No matter how much I change the "F" gcode setting on a job the feed rate is extremely slow. Exactly what controls the job feed speed rate with the acron12 router control software. As an 80 year old here I need the answer to be straight to the question.
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 2720
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Feed Rate
There is no short answer because the problem could have many root causes.
pls. post a report, so we can help you.
Uwe
pls. post a report, so we can help you.
Uwe
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 3329
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Feed Rate
And a copy of the g-code file giving you problems.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 3
- Joined: Tue Apr 06, 2021 9:49 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 0309214470
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Feed Rate
It appears the feed over ride was not correctly set so now the feed speed can be changed within the g-code.
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 2
- Joined: Wed Oct 23, 2024 3:44 am
- Acorn CNC Controller: No
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Feed Rate
I want to see how you solve the problem
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 2720
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Feed Rate
I suppose he set feed rate override back to 100%
Uwe
(Note: Liking will "up vote" a post in the search results helping others find good information faster)