That is what you can get with cheap Chinese hardware (Machine, Servos, Ball Screws and Scales) if you use Acorn Six CNC....
10 Parts within 0.01mm, no special effort, tools measured with the TTO, Programm with Intercon, hit and run, no further corrections in the setup or tool wear.
5 Tool changes per part with a Chinese Multifix copy tool holder, no special efforts, just an ok set up cheap machine.
Chuck is a good EU made Bison, Acorn Six with closed loop, scales and dialed in with all compensations, Beta 5.19 software.
OD threads with 2000 rpm, Id threads rigid tapped with 1000 rpm.
I am very pleased how easy it is to make good parts fast with Centroid CNC.
Uwe
Precision turning
Moderator: cnckeith
-
- Posts: 2640
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Precision turning
3 users liked this post
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 7931
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Precision turning
right on! impressive. thanks for posting.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 83
- Joined: Thu May 12, 2022 2:13 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Precision turning
Is it just aluminum?
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 2640
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Precision turning
With high alloy tool steel also no problem to be within IT7 tolerance from first part on...
... but I hate cleaning steel chips, even if they have a cool blue color
Uwe
... but I hate cleaning steel chips, even if they have a cool blue color
Uwe
1 user liked this post
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 7931
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Precision turning
cool!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 2640
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Precision turning
And now small long parts without using a center point...
Uwe
Uwe
1 user liked this post
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
(Note: Liking will "up vote" a post in the search results helping others find good information faster)
-
- Posts: 2640
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Precision turning
Milling is also ok with compensation dialed in right.
Fusion 4mm, real part 4.001 - 4.007mm right after posting and hit cycle start on a cheap chinese benchtop mill within a series of 10 parts...
Finding center of the turned part is <0.005 mm deviation with KP3 probe compared to a dial indicator on the spindle.
Uwe
Fusion 4mm, real part 4.001 - 4.007mm right after posting and hit cycle start on a cheap chinese benchtop mill within a series of 10 parts...
Finding center of the turned part is <0.005 mm deviation with KP3 probe compared to a dial indicator on the spindle.
Uwe
(Note: Liking will "up vote" a post in the search results helping others find good information faster)