issue with plasma intercon V0.91 BETA

[Cam6.7Cummins]

Hey as far as I remember it was working before I did the plasma V5.10 update. Now as you can see by the pictures of the intercon vs the posted its adding some shapes, I believe it only does it to rectangles.

[Joey]

Hello Cam Thanks for Posting

Can you Post the Plasma Intercon Job file? This will be a .icp file

You can select File-Save as to save the .icp Job file.

Can you also Post the DXF if this was an imported DXF also.

This will help us determine what the issue is.

[Cam6.7Cummins]

I have cnc file attached, if I try an icp it says "Invalid file extension: Series 60 plate.icp"

[Joey]

I see that, to get around the extension issue just Rename the .icp file and replace the .icp with .cnc

[Joey]

Changes were made to the Forum, Plasma Intercon .icp files are now accepted

[Cam6.7Cummins]

Hey, no DXF files used. Was drawn with intercon.

[Cam6.7Cummins]

got an ICP here, thanks for your time!

[Cam6.7Cummins]

Okay I've been playing around with it and the shapes appear when you add a lead in/out one for each, pictures attached.

[Cam6.7Cummins]

Second issue I've come across is the first hole in a couple will be smaller than entered. I've attached screen shot and ICP
The issue can be fixed by deleting the first and entering it later in the events.

[ASPeters]

Hello,

Your first issue was caused by an error in the cutter comp portion of the post process.
I wasn't able to replicate your second issue.

Here's a new build of Plasma Intercon to correct that first issue:

viewtopic.php?f=67&t=10491