Gecko g540 with heatsink and four nema 23 motors and power supply

Moderator: cnckeith

Post Reply
cnckeith
Posts: 7653
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Gecko g540 with heatsink and four nema 23 motors and power supply

Post by cnckeith »

G540 with heat sink, 4 motors , power supply and cables. Used for occasional bench testing. Everything is in excellent condition. $235 with free priority Mail shipping.
Attachments
PXL_20240630_181539385.jpg
PXL_20240630_181532850.jpg
PXL_20240630_181524186.jpg
PXL_20240630_181520485.jpg
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html


Post Reply