Reversing Spindle for individual grooving operation
Moderator: cnckeith
-
- Posts: 47
- Joined: Sat Feb 27, 2021 7:38 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: No
Reversing Spindle for individual grooving operation
On CNC 12 Lathe is there a way to reverse the spindle for a single grooving operation? I want the spindle to spin normally for all the operations apart from one where I need it to spin in the opposite direction. Any help would be appreciated.
-
- Posts: 2226
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Reversing Spindle for individual grooving operation
sure, M3 clockwise and M4 counter clockwise
Uwe
Uwe
-
- Posts: 2226
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Reversing Spindle for individual grooving operation
That is for g-code.
Intercon is using the direction from the tool lib.
If you set a tool to CCW it will turn this direction in Intercon also.
Uwe
Intercon is using the direction from the tool lib.
If you set a tool to CCW it will turn this direction in Intercon also.
Uwe