I am trying to learn intercon for my lathe but I am having an issue I can't figure out .
On a turning cycle it will rapid to where the cut stops back cut to where the cut I thought would start then cut to where it should stop but not rapid back
To the starting point.
So my question is what have I entered wrong so that it rapids to the end of the cut and it does not rapid back to where the cut should start?
Acorn lathe conversational
Moderator: cnckeith
-
- Posts: 51
- Joined: Tue Feb 26, 2019 6:06 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: No
Acorn lathe conversational
- Attachments
-
- report_E415F6F96BC4-1002203779_2024-03-03_10-05-31.zip
- (1007.7 KiB) Downloaded 1 time
Re: Acorn lathe conversational
I would guess it has a problem with the 200 inch distance you have entered for "Return Feed Amount". Try changing that to zero.
-
- Posts: 51
- Joined: Tue Feb 26, 2019 6:06 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: No
Re: Acorn lathe conversational
Thanks I knew I did something stupid . That fixed it .
-
- Posts: 7411
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Acorn lathe conversational
in the future you can post your intercon part programs with your tech support request, that we can see the program and load it on our machines. the intercon programs you create are located in the Intercon directory c:\icn_lath and have the extension .lth
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html