PWM signal is not output from Acorn

[silver2row]

Nice,

I am also working on a laser machine w/ CO2 45w laser. Currently, I have been holding off to make sure I can get the wiring correct for this machine.

...

This is very promising. I appreciate you posting your findings and rework.

Seth

P.S. I have a big inrush line to start the laser and a 24v end to the opposing laser end that gets shifted into other parts of the 24v laser PSU. I will have three PSUs on this project due to Acorn, Laser, and Motor Drivers (I think).

That is the PSU for the CO2 laser. My enclosure is done and I am wiring things slowly. The only thing left to wire are the limit switches and a three wire pump.