Machine Homing job cancelled <self resolved>
Moderator: cnckeith
-
- Posts: 118
- Joined: Sun Nov 12, 2023 1:33 pm
- Acorn CNC Controller: No
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: A901313
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Switzerland
Machine Homing job cancelled <self resolved>
homing to oak install manual failed. find home of a single axis too.
- Attachments
-
- report_0008DC111213-0324231447_2023-11-29_18-33-05.zip
- (699.52 KiB) Downloaded 19 times
Re: Machine Homing job cancelled
You need to jog all axes clear of their limit/home switches, before you try to start the auto homing cycle (or any other cycle, for that matter).
On the Al-i display, the first six dots on the top line (INP1 - INP6) must all be green.
On the Al-i display, the first six dots on the top line (INP1 - INP6) must all be green.
-
- Posts: 118
- Joined: Sun Nov 12, 2023 1:33 pm
- Acorn CNC Controller: No
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: A901313
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Switzerland
Re: Machine Homing job cancelled
look at my pictures again.
Homing started, all limit switches free
Z+ limit switch switched
job aborted!
Homing started, all limit switches free
Z+ limit switch switched
job aborted!
-
- Posts: 118
- Joined: Sun Nov 12, 2023 1:33 pm
- Acorn CNC Controller: No
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: A901313
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Switzerland
Re: Machine Homing job cancelled
Problem solved, limit switch deactivated in CNC 12.