Linear Glass Scales, Acorn 6 with 4 axis WMPG

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
the_Swede
Posts: 15
Joined: Sat Apr 27, 2019 2:35 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Linear Glass Scales, Acorn 6 with 4 axis WMPG

Post by the_Swede »

Hi.
I'm looking to upgrade my DIY cnc mill Acorn setup to a closed loop system, via the Acorn 6 controller. (Linear glass scales)

So here's my question, is the 4 axis WMPG that I'm using today compatible with Acorn 6?

Just trying to save 300$, I guess :D


Best Regards:
P-J Johansson
Best regards:
P-J Johansson

Top
dpascucci_support
Posts: 93
Joined: Thu Sep 21, 2023 9:24 am
Acorn CNC Controller: No
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: No

Re: Linear Glass Scales, Acorn 6 with 4 axis WMPG

Post by dpascucci_support »

Yep! As long as you have at least a Pro license, you should be able to use the WMPG-4 with AcornSix.
Domenic

When requesting support READ THIS POST first.

Please ALWAYS post a FRESH report.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)

Top
the_Swede
Posts: 15
Joined: Sat Apr 27, 2019 2:35 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Linear Glass Scales, Acorn 6 with 4 axis WMPG

Post by the_Swede »

Perfect, thank you :)
Best regards:
P-J Johansson

Top
Post Reply

Return to “Centroid Acorn CNC Controller”