I'm new to programming and I need some help with changing my pierce cycle.
With my fiber laser I don't want the laser head to actual touch the metal surface when it doing the pierce cycle.
I don't want the pierce cycle to be with floating switch or ohmic sensor.
I want it to work with the thc voltage reading.
Example:
The pierce cycle starts.
The torch in coming down (z axis)
Until the thc get the voltage reading of 1 voltage dc, without actual touching the metal.
The thc is connected to a capacitance sensor, so the thc is receiving voltage reading all the time.
It don't needs an arc for the voltage reading..
I would appreciate if I can get some help on this matter