Centroid CNC12 v5.04 has been released. UPDATE v5.06 has been released.
Moderator: cnckeith
-
- Posts: 2291
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Centroid CNC12 v5.02 has been released. Click here to download.
I found a workaround to get V5 Demo running and setup like my real machines. I edit cnctcfg.xml to set up the axis
But on the lathe Y axis does funny things, no moving in MDI, but if I run the default pawn.cnc Y axis is moving with no Y commands in the g-code...
Uwe
But on the lathe Y axis does funny things, no moving in MDI, but if I run the default pawn.cnc Y axis is moving with no Y commands in the g-code...
Uwe
-
- Posts: 7554
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Centroid CNC12 v5.02 has been released. Click here to download.
thanks, we are working the offline cnc12 emulator (with offline intercon) and improving the UX in general, will send you a new version to test soon. -km
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 2291
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Centroid CNC12 v5.02 has been released. Click here to download.
That would be great, even better if offline VCP would work also like in the normal version...
.... Start Stop and Feedrate override would be cool to test g-code offline with VCP (I hate ALT+S)
Uwe
.... Start Stop and Feedrate override would be cool to test g-code offline with VCP (I hate ALT+S)
Uwe
-
- Posts: 7554
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Centroid CNC12 v5.02 has been released. Click here to download.
yes, i agree, but it hasn't been a high priority, i will have an offline/emulator with basic VCP function soon.
offline = no PLC controller = no plc program to interact with, so its not as simple as you might think to do.
emulator cycle start, cancel, , feed hold, jogging we can get working, all the rest of the VCP buttons that require PLC logic... maybe not.
offline = no PLC controller = no plc program to interact with, so its not as simple as you might think to do.
emulator cycle start, cancel, , feed hold, jogging we can get working, all the rest of the VCP buttons that require PLC logic... maybe not.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 2291
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Centroid CNC12 v5.04 has been released. Click here to download.
Cool that offline now is with VCP
Mill works fine, lathe crashes on config motor and after creating report.
Uwe
Mill works fine, lathe crashes on config motor and after creating report.
Uwe
- Attachments
-
- report_0008DC111213-0000000000_2023-06-15_05-54-11.zip
- (514.79 KiB) Downloaded 8 times
-
- Posts: 388
- Joined: Tue Dec 11, 2018 4:03 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA80C8B8-0905181172
E415F6F70BC3-0318203049
98F07B91FC6B-0123236802 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: UK East Coast
Re: Centroid CNC12 v5.04 has been released. Click here to download.
Yep, I'm getting same Unhandled Exception results as Uwe on the new Offline but on BOTH Lathe and Mill after creating Report (which it successfully does) and just entering Motor config.
Note that in my case I had run MS Updates which included the .NET 6.0.18 Security (KB5027797) and Cumulative Net Framework (KB5027538) updates BEFORE installing v5.04 Offline
Note that in my case I had run MS Updates which included the .NET 6.0.18 Security (KB5027797) and Cumulative Net Framework (KB5027538) updates BEFORE installing v5.04 Offline
Hope this helps
Nigel
"You can lead a horse to water but you cannot force it to drink"
Nigel
"You can lead a horse to water but you cannot force it to drink"
-
- Posts: 7554
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Centroid CNC12 v5.04 has been released. Click here to download.
Thanks. Yeah, we're making a lot of changes to the offline build so thanks for reporting this. We're checking into it now
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 388
- Joined: Tue Dec 11, 2018 4:03 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA80C8B8-0905181172
E415F6F70BC3-0318203049
98F07B91FC6B-0123236802 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: UK East Coast
Re: Centroid CNC12 v5.04 has been released. Click here to download.
Thanks Keith
Another very minor glitch with the offline build:
When graphing I sometimes make use of CTRL- (minus) to slow down the redraw. To resume normal redraw graphing speed, I need to exit Offline build and restart as CTRL+ is inoperative.
hope this helps
Hope this helps
Nigel
"You can lead a horse to water but you cannot force it to drink"
Nigel
"You can lead a horse to water but you cannot force it to drink"
-
- Posts: 6
- Joined: Thu Feb 10, 2022 5:55 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Centroid CNC12 v5.04 has been released. Click here to download.
Ctrl- and Ctrl+ both work when using the qwerty part of the keyboard. Only Ctrl- works when using the number pad part of the keyboard.
The crashing of the offline build is related to some features that were created that were not pathed properly. This will be fixed for the next release, but a simple workaround for the time being would be to create a cncm directory for mill offline or a cnct directory for lathe offline. The features were created for the actual boards so no functionality is missing from the offline build due to this bug.
-
- Posts: 75
- Joined: Thu May 12, 2022 2:13 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Centroid CNC12 v5.04 has been released. Click here to download.
Hello I have the following problem when installing
It always asks for the US time.
Unfortunately, I have no idea how to change that.
Everything was great up to V4.8, now I can't do it anymore.
Thanks for your help
Greetings Stephan
It always asks for the US time.
Unfortunately, I have no idea how to change that.
Everything was great up to V4.8, now I can't do it anymore.
Thanks for your help
Greetings Stephan