CNC12 v5.0+ Draft Operator's Manual Mill/Lathe

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
cncjenna
Posts: 21
Joined: Thu May 25, 2023 3:42 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes

CNC12 v5.0+ Draft Operator's Manual Mill/Lathe

Post by cncjenna »

Hi everyone!

We have been hard at work here at Centroid to update and improve the CNC12 v5.0+ Operator's Manual for Mill and Lathe.

Draft versions of the new manual are currently available for download. We are looking for community feedback, to hopefully get some of your perspectives on what you would like to see in the manual, or sections that could be improved upon.

Here is a link to the most recent draft of the v5.0+ Draft CNC12 Mill Operator's Manual
https://www.centroidcnc.com/centroid_di ... manual.pdf

and here is a link to the most recent draft of the v5.0+ Draft CNC12 Lathe Operator's Manual
https://www.centroidcnc.com/centroid_di ... manual.pdf

Be sure to refresh your browser to see the latest version, as we have been updating these pdfs regularly.

Please leave your comments below and we will do our best to incorporate them into the document, and until next time, happy machining!

EDIT: As of 6/7/23, a new draft version of the manual has been uploaded to our existing link
Last edited by cncjenna on Wed Jun 07, 2023 4:00 pm, edited 1 time in total.
cnckeith
Posts: 7554
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: CNC12 v5.0+ Draft Operator's Manual Mill/Lathe

Post by cnckeith »

and a draft of the updated VCP Users manual is now live for comment as well.
https://www.centroidcnc.com/centroid_di ... manual.pdf
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
cncjenna
Posts: 21
Joined: Thu May 25, 2023 3:42 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Re: CNC12 v5.0+ Draft Operator's Manual Mill/Lathe

Post by cncjenna »

As of today, a new draft version of the manual has been uploaded to our existing link. Please go and check it out to see the changes that have been made.
Post Reply