Wiring together, C86ACCP, with E-stop, and contactor

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Gary Campbell
Posts: 2357
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: Yes
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Acorn 238
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Bergland, MI, USA
Contact:
Contact Gary Campbell

Re: Wiring together, C86ACCP, with E-stop, and contactor

Post by Gary Campbell »

Yes I saw the E-stop contactor circuit and it shows the contactor connecting to the relay but the c86 schetmiac also shows the connection to the relay so I was wondering how to integrate that unless relay can have two wires...?
You must have missed the post where I said to keep them separate. There is no logical reason to have a C86 interface board in an estop circuit.
GCnC Control
CNC Control & Retrofits
CNC Depot Modular ATC kits
https://www.youtube.com/user/Islaww1/videos

Top
ShawnM
Community Expert
Posts: 3011
Joined: Fri May 24, 2019 8:34 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 7804734C6498-0401191832
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Clearwater, FL

Re: Wiring together, C86ACCP, with E-stop, and contactor

Post by ShawnM »

As Gary said, keep them separate. Wire the estop per the Centroid diagram.

Top
bbkengineering
Posts: 20
Joined: Sat Feb 04, 2023 5:40 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Wiring together, C86ACCP, with E-stop, and contactor

Post by bbkengineering »

ShawnM wrote: ↑Wed Apr 19, 2023 5:13 pm As Gary said, keep them separate. Wire the estop per the Centroid diagram.
Sorry I missed that, thanks so much for your help.

Top
Post Reply

Return to “Centroid Acorn CNC Controller”