my cheap little mill runs without problems, Acorn and 4.99 beta software.
16h shift with 6000rpm, only short stops for changing work-pieces and still running perfectly
Will not get higher than 45°C, original only build for 2250 rpm
Can not complain about reliability with Acorn running short vector 4 Axis stuff day in day out
Uwe
Sorry no problems....
Moderator: cnckeith
-
- Posts: 346
- Joined: Thu Nov 23, 2017 1:39 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Sorry no problems....
Bull there is no problem! You didn't tell us what you are making....don't leave us hanging. Fess up inquiring minds want to know!
-
- Posts: 1982
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Sorry no problems....
I am making a series of knife handles from high compressed wood.
Ready to use after 4-axis milling, only the butt need to be cut off.
Needs 40 min with 6000rpm, would be faster with a high speed spindle.
Uwe
Ready to use after 4-axis milling, only the butt need to be cut off.
Needs 40 min with 6000rpm, would be faster with a high speed spindle.
Uwe
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Sorry no problems....
ha! thanks for the endorsement.
lights out manufacturing.
is compressed wood like stabilized wood?
lights out manufacturing.
is compressed wood like stabilized wood?
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 1982
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Sorry no problems....
No there are no chemicals in the wood, it is cooked, and then with very high pressure reduced to 1/3 of its volume.
High strength, foodsave and a even higher price tag
https://www.thechemicalengineer.com/new ... -as-steel/
Uwe
High strength, foodsave and a even higher price tag
https://www.thechemicalengineer.com/new ... -as-steel/
Uwe