z,x,c all work in mdi but not y?????

[cmkanefab]

i could use some help with this

z,x,c all work in mdi but not y?????

g0 or g1 returns invalid character error..

any help on this new issue would be appreciated?

[suntravel]

Current 4.99 beta is the only lathe software with working Y, I used B on 4.82

But wait for next Beta with bugfree C-Axis integration for Acorn.

Uwe

[cmkanefab]

if i sub b in for y in wizard and g code that works?

[cmkanefab]

i tried 499ver3 and lost the db25 signals to y.....tried using header and 24v no joy moved back to 4.82 y works for jog home so i assumed g code worked.

[cmkanefab]

correction jog and home macro work now but no mdi

[cmkanefab]

should also say im using a acorn4

[suntravel]

B worked fine with Acorn4, 4th axis in Wizard linear B and MDI should go.

Test 499R4 pls. If there is a bug in DB25 for 4th axis, report and it will be fixed also in R5

And you can use Y

Uwe

[cnckeith]

i moved this thread to the beta software discussion forum.