x-x+ jogging moves in the same direction in the x- direction <resovled>
Moderator: cnckeith
-
- Posts: 23
- Joined: Mon Jan 23, 2023 12:36 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: x-x+ jogging moves in the same direction in the x- direction
sorry for the screen shots snip wasn't working
-
- Posts: 23
- Joined: Mon Jan 23, 2023 12:36 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: x-x+ jogging moves in the same direction in the x- direction
got the boar from centroid website
-
- Posts: 7554
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: x-x+ jogging moves in the same direction in the x- direction
thanks, i have that info from the report.zip
what i was asking for is screen shots from the clearpath software setup screen for each axis.
use the windows snipping tool. ,type 'snip" in the windows search to find it
what i was asking for is screen shots from the clearpath software setup screen for each axis.
use the windows snipping tool. ,type 'snip" in the windows search to find it
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: x-x+ jogging moves in the same direction in the x- direction
First, make sure your wiring is OK. Then move X over to the 4th axis on Acorn and assign the 4th axis in the Wizard to X and see if your axis starts behaving.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: x-x+ jogging moves in the same direction in the x- direction
When did you buy the board?
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 23
- Joined: Mon Jan 23, 2023 12:36 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: x-x+ jogging moves in the same direction in the x- direction
moved x wiring over to 4th axis would not allow me to name it x but called it a axis and it works as should looks like I have lost x axis or #1 axis do you happen to know if I can change anything else to get it to read x and not a
for now it will only be a 3 axis mill?
for now it will only be a 3 axis mill?
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: x-x+ jogging moves in the same direction in the x- direction
Did you change it from a rotary axis to a linear axis?mccue.sc wrote: ↑Wed Jan 25, 2023 9:41 pm moved x wiring over to 4th axis would not allow me to name it x but called it a axis and it works as should looks like I have lost x axis or #1 axis do you happen to know if I can change anything else to get it to read x and not a
for now it will only be a 3 axis mill?
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 46
- Joined: Wed Jan 25, 2023 9:16 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6679
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: x-x+ jogging moves in the same direction in the x- direction
Possibly one of the cables got nicked/cut when running them through the bulkhead and is now shorting out somehow? Just a wild guess but these things happen.