Made a makro to mill figure eight oil grooves...
Could be made with CAM also, but for turning parts I am faster using only Intercon.
One way is to copy CAM code into files made with Intercon, but if you have to change something, you have to handcode, or copy again...
Both to slow, IMHO better to make functions with macros which can be used in Intercon. That is what you can see here.
A macro to mill all sizes of this type of Oil grooves, that is easy to use with a few parameters.
Uwe
Figure Eight Oil Grooves with a lathe
Moderator: cnckeith
-
- Posts: 2226
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Figure Eight Oil Grooves with a lathe
- Attachments
-
- OilGroove.cnc
- (1.35 KiB) Downloaded 6 times
-
- O9001.cnc
- (870 Bytes) Downloaded 7 times
-
- Posts: 7494
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Figure Eight Oil Grooves with a lathe
Groovy, thanks for posting!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html