routeur cnc acorn auto construction
Moderator: cnckeith
-
- Posts: 216
- Joined: Wed Jul 28, 2021 3:54 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: routeur cnc acorn auto construction
Hello guys I wonder if there is not an electrical protection to add in the cabinet who would have an idea
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: routeur cnc acorn auto construction
line filters are always a good idea
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 216
- Joined: Wed Jul 28, 2021 3:54 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: routeur cnc acorn auto construction
Hello, thank you for your answer
I heard about it but I don't see at all what should put
They told me to put a filter for the three power supplies and one for the vfd but I have no idea what to buy
If not Here is the beginning of my wiring and the position of all the components if something shocks you do not hesitate to tell me
PS can you send me a link for the filters with the power I have to put
Thanks in advance
-
- Posts: 2234
- Joined: Fri May 24, 2019 8:34 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 7804734C6498-0401191832
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Clearwater, FL
Re: routeur cnc acorn auto construction
Here are some links to the last type inline noise filters I used on a retrofit build I did. I don't know if you have single phase power or three phase power but here's a link to both. These can be bought online from many suppliers like Digikey or Mouser here in the US, I'm not sure of a supplier in your country. The single phase units are about $20 USD and the 3 phase units are about twice as much. There are many other brands available but this will get you started as to what you can use.
Single phase line noise filters:
https://www.schaffner.com/product/fn2030
Three phase line noise filters:
https://www.schaffner.com/product/fn355
Single phase line noise filters:
https://www.schaffner.com/product/fn2030
Three phase line noise filters:
https://www.schaffner.com/product/fn355
-
- Posts: 216
- Joined: Wed Jul 28, 2021 3:54 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: routeur cnc acorn auto construction
Ok I understand better now what I needShawnM wrote: ↑Thu Jun 30, 2022 8:03 am Here are some links to the last type inline noise filters I used on a retrofit build I did. I don't know if you have single phase power or three phase power but here's a link to both. These can be bought online from many suppliers like Digikey or Mouser here in the US, I'm not sure of a supplier in your country. The single phase units are about $20 USD and the 3 phase units are about twice as much. There are many other brands available but this will get you started as to what you can use.
Single phase line noise filters:
https://www.schaffner.com/product/fn2030
Three phase line noise filters:
https://www.schaffner.com/product/fn355
Ok je comprends mieux maintenant ce qu'il me faut