Issues with tool paths - Fusion 360 to Centroid totally diffrent. <solved>

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
tomb
Posts: 59
Joined: Wed Nov 24, 2021 1:33 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Issues with tool paths - Fusion 360 to Centroid totally diffrent

Post by tomb »

Well this one simple part represents months of reading and learning, all the help from this forum (Been fantastic help) and £1000's in parts and machine but we got there. Time to learn how to be a CAD/CAM programmer and CNC operator.

Thanks for all your help guys, its greatly appreciated!
First part - Test 1.jpg
Last edited by tomb on Fri Mar 25, 2022 4:00 pm, edited 1 time in total.

Top
cnckeith
Site Admin
Posts: 8893
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: Issues with tool paths - Fusion 360 to Centroid totally diffrent

Post by cnckeith »

thanks for reporting back your success.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html

Top
Post Reply

Return to “Centroid Acorn CNC Controller”