Hi
Making my way through the wiring on my CNC Lathe and i had a quick question on the Spindle OK input. My VFD has quite a few settings for this relay, is it just a simple Run command on the normally closed side?
Cheers
Quick question - "Spindle OK" input <resolved>
Moderator: cnckeith
-
- Posts: 120
- Joined: Tue Sep 28, 2021 6:26 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Quick question - "Spindle OK" input
No. If SpindleOk is not "made", it's a fault [1]. It can be inverted if needed
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 59
- Joined: Wed Nov 24, 2021 1:33 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Quick question - "Spindle OK" input
Thank you for the quick reply, seems really obvious now you've told me.
-
- Posts: 59
- Joined: Wed Nov 24, 2021 1:33 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Quick question - "Spindle OK" input <resolved>
Just to follow on from this, i'm looking at the wiring diagram "S14987-ACORN_rev4_4_BIT_GRAY_CODE_TURRET_LATHE_STANDARD_CONNECTIONS" (Please see attached)
Why do you need a Drive OK and Spindle OK?
Why do you need a Drive OK and Spindle OK?
- Attachments
-
- S14987-ACORN_rev4_4_BIT_GRAY_CODE_TURRET_LATHE_STANDARD_CONNECTIONS (1).pdf
- (152.66 KiB) Downloaded 52 times
-
- Posts: 1971
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Quick question - "Spindle OK" input <resolved>
Drive OK is for the axis drives and Spindle Ok for the Spindle
Uwe
Uwe
-
- Posts: 59
- Joined: Wed Nov 24, 2021 1:33 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Quick question - "Spindle OK" input <resolved>
Thank you i just wanted to double check. My Stepperonline DM556T's don't have that output so that free's up some I/O