pc for allin1dc
Moderator: cnckeith
-
- Posts: 1
- Joined: Sat Jan 08, 2022 9:07 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
pc for allin1dc
hello i am looking for information on which pc i should have for my allin1dc. i have read the requirments for the pc but when i start asking questions at various stores i cant seem to get any answers. i want a pc with sshd . any recommendations ty
-
- Posts: 2214
- Joined: Fri May 24, 2019 8:34 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 7804734C6498-0401191832
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Clearwater, FL
Re: pc for allin1dc
You can buy a compatible PC that meets the requirements on eBay very easily. You can get them preloaded with Win10 Pro, an SSD and at least 8GB of RAM for about $150-$200. A monitor that can display 1920x1080 is highly recommended. You can pick these up all day long for around $75. If you want a touch screen then plan on spending about $150 for a ViewSonic.
Here's an eBay link for one:
https://www.ebay.com/itm/334170733366?h ... SwdwFhYvFb
All you need to do is look up the processor (like i5-4570T) on the CPU Benchmark webpage to be sure it's at has at least 1500 rating for the SINGLE THREAD RATING. There's a link for the website on the Centroid PC requirement page. The machine in the eBay link is rated at 1922.
Going to a "store" would be a waste of time in my opinion as most, if not all, sales people there wont even know what a CPU benchmark is.
Here's an eBay link for one:
https://www.ebay.com/itm/334170733366?h ... SwdwFhYvFb
All you need to do is look up the processor (like i5-4570T) on the CPU Benchmark webpage to be sure it's at has at least 1500 rating for the SINGLE THREAD RATING. There's a link for the website on the Centroid PC requirement page. The machine in the eBay link is rated at 1922.
Going to a "store" would be a waste of time in my opinion as most, if not all, sales people there wont even know what a CPU benchmark is.
-
- Posts: 667
- Joined: Fri Nov 30, 2018 1:04 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Thorp WI
Re: pc for allin1dc
Just ordered two from that seller last week. I also have two others with the same specs that are in use (one of them for three years now) and I can confirm that they work very well. As stated, that processor (i5-4570T) has a good single thread rating. Always check the processor specs by searching here...https://www.cpubenchmark.net/
Scott