Touch Screen Monitors
Moderator: cnckeith
-
- Posts: 24
- Joined: Mon Jul 12, 2021 6:55 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: None
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Kansas
Re: Touch Screen Monitors
I recently purchased an Acer UT222Q at Micro Center for $249. At 22" its a little larger than I really wanted for my little bench top mill but I can live with it. I connected it via Display Port and could not get the touch screen functionality to work. I've since learned you need the USB connection also. I guess that makes sense in that the Display Port likely just sends data out, not in. The documentation from Acer is really lacking. All in all I'm very happy with it, but I'm only in bench test mode so far.
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Touch Screen Monitors
Just FYI, the Viewsonic TD2210 will be back in stock hopefully by the end of November so I am told by Viewsonic. It has not been discontinued. Victim of the chip shortages.
Marty
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 22
- Joined: Sat Jul 10, 2021 10:43 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Touch Screen Monitors
Hi, good job: this is what I'd like to do. Could you please share something more?
Thanks,
Henry
Thanks,
Henry
-
- Posts: 728
- Joined: Mon Feb 19, 2018 2:52 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 38D269594F9C-0110180512
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: UK
- Contact:
Re: Touch Screen Monitors
I recently bought a Hanspree touchscreen. Very nice, works fine.
https://www.hannspree.eu/product/ht-225-hpb/
I'm actually using it with LinuxCNC but it would work nicely with Windows / CNC12. It uses a capacitive touch system - the Viewsonic seems to use the IR (light) system which I found to be easily upset by direct sunlight and dust. In the end I disabled the IR touch feature and now just use CNC12 with a mouse. Personally, I'd recommend either capacitive or resistive, not IR.
https://www.hannspree.eu/product/ht-225-hpb/
I'm actually using it with LinuxCNC but it would work nicely with Windows / CNC12. It uses a capacitive touch system - the Viewsonic seems to use the IR (light) system which I found to be easily upset by direct sunlight and dust. In the end I disabled the IR touch feature and now just use CNC12 with a mouse. Personally, I'd recommend either capacitive or resistive, not IR.
-
- Posts: 675
- Joined: Fri Nov 30, 2018 1:04 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Thorp WI
Re: Touch Screen Monitors
That looks like a clone of the Planar Helium PCT2235, or vice versa. I got mine in 08/10/2020 for $180, now it's $306!
Scott
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Touch Screen Monitors
One of my favorites. Because it uses resistive technology, better than capacitive, its also a low end commercial Touchscreen.
Refurbs have been good:
ViewSonic TD2210 22 Inch 1080p Single Point Resistive Touch Screen Monitor with DVI and VGA, Black (Renewed)
by DealParade
Learn more:
Refurbs have been good:
ViewSonic TD2210 22 Inch 1080p Single Point Resistive Touch Screen Monitor with DVI and VGA, Black (Renewed)
by DealParade
Learn more:
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 728
- Joined: Mon Feb 19, 2018 2:52 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 38D269594F9C-0110180512
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: UK
- Contact:
Re: Touch Screen Monitors
Marty - the Viewsonic touchscreens I'm seeing currently seem to be based on IR sensors. Do they still make the resistive ones you refer to? I couldn't see any.
https://www.viewsonic.com/uk/products/lcd/TD2223
https://www.viewsonic.com/uk/products/lcd/TD2223
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Touch Screen Monitors
The link I posted from Amazon (US) are the resistive monitors. They still make them, they had a chip shortage that was affecting supply. They had hoped to have them back in stock at some of their resellers by now. (I spoke with their sales team) I thought it was discontinue so I reached out.Muzzer wrote: ↑Tue Dec 28, 2021 7:03 am Marty - the Viewsonic touchscreens I'm seeing currently seem to be based on IR sensors. Do they still make the resistive ones you refer to? I couldn't see any.
https://www.viewsonic.com/uk/products/lcd/TD2223
TD2210 is a good monitor. Gary turned me on to it some time ago.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 2131
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Touch Screen Monitors
ThinkCentre M900z All-in-One
Dont know what type of touchscreen it has, but works fine even wit some dust on it
Uwe
Dont know what type of touchscreen it has, but works fine even wit some dust on it
Uwe