CNC12 DEMO MODE??
Moderator: cnckeith
-
- Posts: 37
- Joined: Sun Apr 25, 2010 9:58 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
CNC12 DEMO MODE??
I just ordered an ACORN to update my MACH3 6040 CNC router and i wonder if its possible to have a demo mode of the software without a connection to the board. just like to get a feel for it while waiting for the ACORN to arrive?
gerald
gerald
-
- Posts: 120
- Joined: Tue Sep 28, 2021 6:26 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: CNC12 DEMO MODE??
The servo software has a demo program that will do what you want.
https://www.centroidcnc.com/centroid_di ... v420-D.exe
https://www.centroidcnc.com/centroid_di ... v420-D.exe
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 7424
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: CNC12 DEMO MODE??
....not quite the same as Acorn CNC12, no Acorn Wizard, and different VCP. so....centroidsupport wrote: ↑Wed Dec 15, 2021 2:07 pm The servo software has a demo program that will do what you want.
https://www.centroidcnc.com/centroid_di ... v420-D.exe
I'd wait for your Acorn to arrive and hook up in bench test configuration so you can run the actual Acorn CNC12 software.
Be sure to follow the instructions here. There many things you can do in preparation.
https://www.centroidcnc.com/centroid_di ... guide.html
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 9915
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: CNC12 DEMO MODE??
As Keith mentioned, there is nothing to configure with the Demo software, there is no Wizard or Virtual Control Panel. The PC must be able to communicate with the hardware in order for that to work.
That said, what Centroidsupport suggested will allow you to get a feel for the software, loading a program, looking setting up tool library, etc.
Just basically a look around "kick the tires" lots of videos on YouTube you can go watch while waiting for it to arrive.
Marty
That said, what Centroidsupport suggested will allow you to get a feel for the software, loading a program, looking setting up tool library, etc.
Just basically a look around "kick the tires" lots of videos on YouTube you can go watch while waiting for it to arrive.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 2087
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: CNC12 DEMO MODE??
IMHO the Demo is good to get used to Intercon or test programs in the living room on a Laptop. Graphics are working an you can setup the tool library.
I am using it a lot of the machine. The way you can turn 3D graphics in the Demo different to Acorn for me even better.
Regards
Uwe
I am using it a lot of the machine. The way you can turn 3D graphics in the Demo different to Acorn for me even better.
Regards
Uwe
-
- Posts: 7424
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: CNC12 DEMO MODE??
accelerated graphics is in Acorn CNC12 as well. use parameter #260 to activate it. set P260=1
page 312 in the Mill Operator manual.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 2087
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: CNC12 DEMO MODE??
Thanks Keith for the kick
I have read about this setting but never changed it, was sure must be on by default
Now I am happy, working with Centroid gets smoother every day.
Kind regards
Uwe
-
- Posts: 668
- Joined: Fri Nov 30, 2018 1:04 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Thorp WI
Re: CNC12 DEMO MODE??
Keith, on the topic of accelerated graphics, how about having a toggle for this on the graph screen? Since default is "off" and the only way to turn it on is through params, many may never give it a try. It would also be great if the "Run" screen could use this type of view, but with a cone that follows and highlights the toolpath as it's running, and isn't dependent upon tool diameter (thus eliminating the issue of people either not seeing the tool dot or it being too large). Here's an example of what that could look like in both "Run" and "Graph". The added dimensions would be a bonus. I seldom if ever use the "Run" screen, due to the way RTG currently is displayed.
Just some thoughts for future improvements.
Just some thoughts for future improvements.
Scott
-
- Posts: 2209
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact:
Re: CNC12 DEMO MODE??
Sword wrote: ↑Sat Jan 22, 2022 1:36 pm Keith, on the topic of accelerated graphics, how about having a toggle for this on the graph screen? Since default is "off" and the only way to turn it on is through params, many may never give it a try. It would also be great if the "Run" screen could use this type of view, but with a cone that follows and highlights the toolpath as it's running, and isn't dependent upon tool diameter (thus eliminating the issue of people either not seeing the tool dot or it being too large). Here's an example of what that could look like in both "Run" and "Graph". The added dimensions would be a bonus. I seldom if ever use the "Run" screen, due to the way RTG currently is displayed.
Just some thoughts for future improvements.
A big PLUS ONE
-
- Posts: 378
- Joined: Tue Dec 11, 2018 4:03 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA80C8B8-0905181172
E415F6F70BC3-0318203049
98F07B91FC6B-0123236802 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: UK East Coast
Re: CNC12 DEMO MODE??
Yep +1 from me too
Hope this helps
Nigel
"You can lead a horse to water but you cannot force it to drink"
Nigel
"You can lead a horse to water but you cannot force it to drink"