First test router retrofit using acorn and cnc12
Moderator: cnckeith
-
- Posts: 7494
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: First test router retrofit using acorn and cnc12
wow! fantastic..looks like a million bucks!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 380
- Joined: Tue Dec 11, 2018 4:03 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA80C8B8-0905181172
E415F6F70BC3-0318203049
98F07B91FC6B-0123236802 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: UK East Coast
Re: First test router retrofit using acorn and cnc12
+1 That is seriously nice work Noel
Hope this helps
Nigel
"You can lead a horse to water but you cannot force it to drink"
Nigel
"You can lead a horse to water but you cannot force it to drink"
-
- Posts: 84
- Joined: Sat Feb 20, 2021 12:37 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: (2669)
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: First test router retrofit using acorn and cnc12
connecting I/Os from Acorn and Ether1616 for operate multi spindle drill head, now is done.
-
- Posts: 84
- Joined: Sat Feb 20, 2021 12:37 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: (2669)
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: First test router retrofit using acorn and cnc12
this is a test of a simple g code program that embedded macros for multi spindle drills under Mcode representing mfuncXX.mac
-
- Posts: 84
- Joined: Sat Feb 20, 2021 12:37 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: (2669)
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: First test router retrofit using acorn and cnc12
here are the multi spindle drills running one by one or sets of two and three, they can be configured by just changing the Mxx number that represent every drill.
in every macro is determined the offset position for that drill from origin, followed by the G91 it position that drill where it needs to be.
so when the Mxx code is called in the program each drill search it's position. that is the best way i could find when using a cad/cam software like Vcarve.
i laso had to create a new post procesor to generate drill programs separate.
maybe some one has a better solution for this operations?
-
- Posts: 7494
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: First test router retrofit using acorn and cnc12
nice and clean! thanks for posting.noel-nogal wrote: ↑Tue Nov 16, 2021 1:44 pm acorn04 (2).jpg
connecting I/Os from Acorn and Ether1616 for operate multi spindle drill head, now is done.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 84
- Joined: Sat Feb 20, 2021 12:37 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: (2669)
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 7494
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: First test router retrofit using acorn and cnc12
right on! production mode!!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 84
- Joined: Sat Feb 20, 2021 12:37 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: (2669)
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: First test router retrofit using acorn and cnc12
Mr. keith
i am trying to unlock the work cordinates system from #7 to #18 but they just do not unlock with the F2 key or the button, do you know how to do this, i need enter values for setting my multi spindle drills, i have 10 drills and i am using wcs from G55 to G59 assigning each drill offset on each wcs, but i need the extra ones to assign the other 5 drills.
best regards
Noel
i am trying to unlock the work cordinates system from #7 to #18 but they just do not unlock with the F2 key or the button, do you know how to do this, i need enter values for setting my multi spindle drills, i have 10 drills and i am using wcs from G55 to G59 assigning each drill offset on each wcs, but i need the extra ones to assign the other 5 drills.
best regards
Noel
-
- Posts: 7494
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: First test router retrofit using acorn and cnc12
Please post a fresh report.zipnoel-nogal wrote: ↑Thu Dec 23, 2021 5:36 pm Mr. keith
i am trying to unlock the work cordinates system from #7 to #18 but they just do not unlock with the F2 key or the button, do you know how to do this, i need enter values for setting my multi spindle drills, i have 10 drills and i am using wcs from G55 to G59 assigning each drill offset on each wcs, but i need the extra ones to assign the other 5 drills.
best regards
Noel
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html