Thanks… i will try it tomorrow and i will let u know.. do i need to compile it or is overwriting files in cncm folder good enough?Allin1Chris wrote: ↑Mon May 17, 2021 2:19 pm Hi LenelyWolf,
Attached is a modified version of your PLC, that should resolve the delay issue. Let us know how it works!
To Install, Extract the contents of the .zip directly into your C:\cncm folder and overwrite files. Powercycle your acorn after installing the files and restart the software.
Door safety switch
Moderator: cnckeith
-
- Posts: 118
- Joined: Sun Jan 17, 2021 3:13 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Door safety switch
-
- Posts: 135
- Joined: Wed Jul 31, 2019 12:53 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Door safety switch
Its Pre-compiled, overwriting will be good enough.
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Centroid PLC Tutorial Videos
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Centroid PLC Tutorial Videos
-
- Posts: 118
- Joined: Sun Jan 17, 2021 3:13 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Door safety switch
Hi
Just try that and unfortunately it doesn’t work. I have unzipped and overwritten all files in my cncm folder, restarted my machine and my pc and it still ran the first second or so. I have even tried to compile it again and it is still the same. My program is really simple testing one
G0 X-50.
G04 P1.
G0 Y-50.
G04 P1.
G0 X-5. Y-5. Z-5.
M30
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Door safety switch
ALWAYS, ALWAYS, ALWAYS Post a Fresh Follow up Report.
That way Chris can take a look at it and see what you did or didn't do, or what the software IS or ISN'T doing
Marty
That way Chris can take a look at it and see what you did or didn't do, or what the software IS or ISN'T doing
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 118
- Joined: Sun Jan 17, 2021 3:13 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Door safety switch
Ok… here it ismartyscncgarage wrote: ↑Tue May 18, 2021 12:05 pm ALWAYS, ALWAYS, ALWAYS Post a Fresh Follow up Report.
That way Chris can take a look at it and see what you did or didn't do, or what the software IS or ISN'T doing
Marty
- Attachments
-
- report_E062347D88E8-1215204216_2021-05-18_13-24-57.zip
- (652.88 KiB) Downloaded 76 times
-
- Posts: 135
- Joined: Wed Jul 31, 2019 12:53 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Door safety switch
LenelyWolf,
Attached is another modified PLC for the door. Same as before, extract to your directory and overwrite files. It is pre-compiled.
Let us know if it works out!
Attached is another modified PLC for the door. Same as before, extract to your directory and overwrite files. It is pre-compiled.
Let us know if it works out!
- Attachments
-
- Acorn_Door_Fix2.zip
- (156.13 KiB) Downloaded 92 times
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Centroid PLC Tutorial Videos
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Centroid PLC Tutorial Videos
-
- Posts: 118
- Joined: Sun Jan 17, 2021 3:13 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Door safety switch
Thanks… will let u know.. however I’ve added licence to my cnc12 today so is it save to overwrite the files anyway?Allin1Chris wrote: ↑Wed May 19, 2021 3:22 pm LenelyWolf,
Attached is another modified PLC for the door. Same as before, extract to your directory and overwrite files. It is pre-compiled.
Let us know if it works out!
-
- Posts: 135
- Joined: Wed Jul 31, 2019 12:53 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Door safety switch
Yes, the PLC should not effect your license status in software. If it does, you should still have the file centroid sent you to re-activate it.
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Centroid PLC Tutorial Videos
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Centroid PLC Tutorial Videos
-
- Posts: 118
- Joined: Sun Jan 17, 2021 3:13 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Door safety switch
So good news… the second fix works nicely. Thank youAllin1Chris wrote: ↑Wed May 19, 2021 4:48 pm Yes, the PLC should not effect your license status in software. If it does, you should still have the file centroid sent you to re-activate it.