First: will restoring report.zip restore all settings to new acorn board or do I have to go through any of bench tests like spindle bench test and other settings all over again?
Second: Will I have to do restore report.zip if only BBG is replaced for new one or the settings are stored on acorn card
Restoring report.zip to new acorn board (Resolved)
Moderator: cnckeith
-
- Posts: 118
- Joined: Sun Jan 17, 2021 3:13 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 2209
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact:
Re: Restoring report.zip to new acorn board
1) Yes, IF the same version of software is installed
2) Yes AND you will need Centroid to generate a new license
2) Yes AND you will need Centroid to generate a new license
-
- Posts: 118
- Joined: Sun Jan 17, 2021 3:13 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Restoring report.zip to new acorn board
Thanks… So no need to set anything when restoring either on new bbg or new acornGary Campbell wrote: ↑Sat May 15, 2021 10:29 am 1) Yes, IF the same version of software is installed
2) Yes AND you will need Centroid to generate a new license
-
- Posts: 2209
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact:
Re: Restoring report.zip to new acorn board
Follow the videos for a new install
-
- Posts: 118
- Joined: Sun Jan 17, 2021 3:13 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Restoring report.zip to new acorn board
All done.. replaced new bbg and everything works as it should