Haas VF-1 1994 Retrofit to Centroid Allin1DC - Custom MPG & Buttons - *Solved*

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
manni
Posts: 25
Joined: Sun Jan 24, 2021 2:58 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Walsall - UK
Contact:

Haas VF-1 1994 Retrofit to Centroid Allin1DC - Custom MPG & Buttons - *Solved*

Post by manni »

HI,

Any guide on this will be appreciated.

I am using a rotary selector for the axis and the wiper signal should I take it from COM negative ? Attached is the image from your drawings which I have wired all but left is the return signal to tell control on which axis is selected. same will apply to the jog speed and LED


I have added 2 more buttons to my cabinet for cycle start and feed hold. any idea on how to wire them to input and assign them as buttons?

was stuck on the home switch but Marty's video has help, as axis reversal, will swap the wire of limit switch tomorrow.

if you out there thanks a ton Marty for you efforts in explaining.

will update my progress on my other post soon.

Thanking you all in advance.

Manni
Attachments
MPG Wiring.JPG
wiring.jpg
images (1).jpg
images (1).jpg (5.59 KiB) Viewed 1836 times
20210218_133323.jpg
manni
Posts: 25
Joined: Sun Jan 24, 2021 2:58 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Walsall - UK
Contact:

Re: Haas VF-1 1994 Retrofit to Centroid Allin1DC - Custom MPG & Buttons - *Solved*

Post by manni »

got it figured out, my machine is near to completion.

Will upload my progress in my other post.
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Haas VF-1 1994 Retrofit to Centroid Allin1DC - Custom MPG & Buttons - *Solved*

Post by martyscncgarage »

manni wrote: Thu Mar 18, 2021 4:06 pm got it figured out, my machine is near to completion.

Will upload my progress in my other post.
Great, do let us know what you did.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
manni
Posts: 25
Joined: Sun Jan 24, 2021 2:58 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Walsall - UK
Contact:

Re: Haas VF-1 1994 Retrofit to Centroid Allin1DC - Custom MPG & Buttons - *Solved*

Post by manni »

add the wiper wire of rotary switches, 1 for axis and 1 for speed both wires to 5vdc COM.
also you can add a led for each axis/speed selected.
Post Reply