I just upgraded from V4.5 to V4.62 but am unclear regarding the auto square set up. I read all of the upgrade notes but it still left me "puzzled". I did not have the option when setting up the inputs in the I?O setup for selecting the slaved motor input sensor to input 2. When viewing the AXIS PAIRING setup screen and notes regarding SLAVED AXIS HOME SWITCH PLC INPUT I was wondering if it was setup automatically so need some clarification.
Thank you for your support
Jr
Question Re: V4.6 (Resolved)
Moderator: cnckeith
-
- Posts: 54
- Joined: Wed Jan 09, 2019 1:59 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA798AE4-1119181352
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Contact:
Question Re: V4.6 (Resolved)
- Attachments
-
- report_F045DA798AE4-1119181352_2021-02-23_11-23-42.zip
- (602.94 KiB) Downloaded 70 times
-
- Posts: 7325
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Question Re: V4.6
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 7325
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Question Re: V4.6
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 7325
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Question Re: V4.6
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 54
- Joined: Wed Jan 09, 2019 1:59 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA798AE4-1119181352
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Contact:
Re: Question Re: V4.6
Thank you Keith. After seeing your first post I realized I didn't change the INPUT TYPE from the 'ROUTER' selection to the HOME selection to find the SLAVE HOME INPUT. After looking further into this I found that I should not have moved the settings from the VCP AUX KEY MACRO ASSIGNMENTS from the previous version to V4.62.
Thnaks for the hellp. I should have another cup of coffee to keep me more alert when doing the upgrade
Jr
Thnaks for the hellp. I should have another cup of coffee to keep me more alert when doing the upgrade
Jr
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Question Re: V4.6
Please report back if all is resolved.Jrlee wrote: ↑Tue Feb 23, 2021 3:04 pm Thank you Keith. After seeing your first post I realized I didn't change the INPUT TYPE from the 'ROUTER' selection to the HOME selection to find the SLAVE HOME INPUT. After looking further into this I found that I should not have moved the settings from the VCP AUX KEY MACRO ASSIGNMENTS from the previous version to V4.62.
Thnaks for the hellp. I should have another cup of coffee to keep me more alert when doing the upgrade
Jr
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 54
- Joined: Wed Jan 09, 2019 1:59 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA798AE4-1119181352
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Contact:
Re: Question Re: V4.6
Marty all is resolved.
Jr
Jr
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Question Re: V4.6
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ