cnc 12 version update

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Fueler1
Posts: 112
Joined: Fri Apr 13, 2018 10:04 am
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 101981
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

cnc 12 version update

Post by Fueler1 »

I am on version 4.14 m400 allin1.
I can't decide what is my path on this page.
https://www.centroidcnc.com/centroid_di ... loads.html
Am I supposed to pay for 4.16 or 4.18 or not?
tblough
Posts: 3071
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: cnc 12 version update

Post by tblough »

Depends on how long ago you bought ypur AIO. Less than 18mo and it's free. More than that and you have to pay a minimal fee, but chances are you'll come out ahead because of a few new options you'll gain.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
cncsnw
Posts: 3763
Joined: Wed Mar 24, 2010 5:48 pm

Re: cnc 12 version update

Post by cncsnw »

I thought the structure was, less than 18 months and it's $99, more than that and it's $299.

Perhaps Keith can clarify.
tblough
Posts: 3071
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: cnc 12 version update

Post by tblough »

You are right. Pro version upgrade is $99 for 18mo or less, $299 for longer, and $299 for ultimate if you already have an Ultimate level item unlock, otherwise +$450 to go from pro to ultimate.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
swissi
Posts: 573
Joined: Wed Aug 29, 2018 11:15 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 985DADEB24D5-0309180716
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: cnc 12 version update

Post by swissi »

Looks like the Upgrade Page has not been updated:

upgrade.png

It still says CNC12 v4.16 instead of v4.18.

-swissi
If you are using Fusion 360, check out my CNC12 specific Post Processor
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp

Contact me at swissi2000@gmail.com
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: cnc 12 version update

Post by cnckeith »

hi, thanks.

i put a + in front of v4.16. so now it reads v4.16+ as the license file works with v4.16 and v4.18 , same license file works with both versions and will continue to be that way until there is a major release. :D
swissi wrote: Tue Feb 23, 2021 11:14 am Looks like the Upgrade Page has not been updated:


upgrade.png


It still says CNC12 v4.16 instead of v4.18.

-swissi
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply